wok rev 22392

ffserver removed in ffmpeg >= 4.0
author Pascal Bellard <pascal.bellard@slitaz.org>
date Sun Dec 01 11:07:17 2019 +0100 (11 days ago)
parents aca084c6314c
children da470720fb85
files ffserver/receipt ffserver/stuff/ffserver.conf musl-libc-dev/receipt musl-libc/receipt
line diff
     1.1 --- a/ffserver/receipt	Fri Nov 29 13:06:35 2019 +0100
     1.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     1.3 @@ -1,22 +0,0 @@
     1.4 -# SliTaz package receipt.
     1.5 -
     1.6 -PACKAGE="ffserver"
     1.7 -VERSION="4.1.3"
     1.8 -CATEGORY="multimedia"
     1.9 -SHORT_DESC="FFmpeg audio/video fast and small stream server."
    1.10 -MAINTAINER="pascal.bellard@slitaz.org"
    1.11 -LICENSE="GPL2 LGPL2.1"
    1.12 -WEB_SITE="http://ffmpeg.org/"
    1.13 -WANTED="ffmpeg"
    1.14 -TAGS="audio video server"
    1.15 -HOST_ARCH="i486 arm"
    1.16 -
    1.17 -DEPENDS="ffmpeg"
    1.18 -
    1.19 -# Rules to gen a SliTaz package suitable for Tazpkg.
    1.20 -genpkg_rules()
    1.21 -{
    1.22 -	mkdir -p $fs/usr/bin $fs/etc
    1.23 -	cp ${stuff}/ffserver.conf $fs/etc
    1.24 -	cp -a $install/usr/bin/ffserver $fs/usr/bin
    1.25 -}
     2.1 --- a/ffserver/stuff/ffserver.conf	Fri Nov 29 13:06:35 2019 +0100
     2.2 +++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
     2.3 @@ -1,377 +0,0 @@
     2.4 -# /etc/ffserver.conf
     2.5 -#
     2.6 -# Port on which the server is listening. You must select a different
     2.7 -# port from your standard HTTP web server if it is running on the same
     2.8 -# computer.
     2.9 -Port 8090
    2.10 -
    2.11 -# Address on which the server is bound. Only useful if you have
    2.12 -# several network interfaces.
    2.13 -BindAddress 0.0.0.0
    2.14 -
    2.15 -# Number of simultaneous HTTP connections that can be handled. It has
    2.16 -# to be defined *before* the MaxClients parameter, since it defines the
    2.17 -# MaxClients maximum limit.
    2.18 -MaxHTTPConnections 2000
    2.19 -
    2.20 -# Number of simultaneous requests that can be handled. Since FFServer
    2.21 -# is very fast, it is more likely that you will want to leave this high
    2.22 -# and use MaxBandwidth, below.
    2.23 -MaxClients 1000
    2.24 -
    2.25 -# This the maximum amount of kbit/sec that you are prepared to
    2.26 -# consume when streaming to clients.
    2.27 -MaxBandwidth 1000
    2.28 -
    2.29 -# Access log file (uses standard Apache log file format)
    2.30 -# '-' is the standard output.
    2.31 -CustomLog -
    2.32 -
    2.33 -# Suppress that if you want to launch ffserver as a daemon.
    2.34 -NoDaemon
    2.35 -
    2.36 -
    2.37 -##################################################################
    2.38 -# Definition of the live feeds. Each live feed contains one video
    2.39 -# and/or audio sequence coming from an ffmpeg encoder or another
    2.40 -# ffserver. This sequence may be encoded simultaneously with several
    2.41 -# codecs at several resolutions.
    2.42 -
    2.43 -<Feed feed1.ffm>
    2.44 -
    2.45 -# You must use 'ffmpeg' to send a live feed to ffserver. In this
    2.46 -# example, you can type:
    2.47 -#
    2.48 -# ffmpeg http://localhost:8090/feed1.ffm
    2.49 -
    2.50 -# ffserver can also do time shifting. It means that it can stream any
    2.51 -# previously recorded live stream. The request should contain:
    2.52 -# "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify
    2.53 -# a path where the feed is stored on disk. You also specify the
    2.54 -# maximum size of the feed, where zero means unlimited. Default:
    2.55 -# File=/tmp/feed_name.ffm FileMaxSize=5M
    2.56 -File /tmp/feed1.ffm
    2.57 -FileMaxSize 200K
    2.58 -
    2.59 -# You could specify
    2.60 -# ReadOnlyFile /saved/specialvideo.ffm
    2.61 -# This marks the file as readonly and it will not be deleted or updated.
    2.62 -
    2.63 -# Specify launch in order to start ffmpeg automatically.
    2.64 -# First ffmpeg must be defined with an appropriate path if needed,
    2.65 -# after that options can follow, but avoid adding the http:// field
    2.66 -#Launch ffmpeg
    2.67 -
    2.68 -# Only allow connections from localhost to the feed.
    2.69 -ACL allow 127.0.0.1
    2.70 -
    2.71 -</Feed>
    2.72 -
    2.73 -
    2.74 -##################################################################
    2.75 -# Now you can define each stream which will be generated from the
    2.76 -# original audio and video stream. Each format has a filename (here
    2.77 -# 'test1.mpg'). FFServer will send this stream when answering a
    2.78 -# request containing this filename.
    2.79 -
    2.80 -<Stream test1.mpg>
    2.81 -
    2.82 -# coming from live feed 'feed1'
    2.83 -Feed feed1.ffm
    2.84 -
    2.85 -# Format of the stream : you can choose among:
    2.86 -# mpeg       : MPEG-1 multiplexed video and audio
    2.87 -# mpegvideo  : only MPEG-1 video
    2.88 -# mp2        : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec)
    2.89 -# ogg        : Ogg format (Vorbis audio codec)
    2.90 -# rm         : RealNetworks-compatible stream. Multiplexed audio and video.
    2.91 -# ra         : RealNetworks-compatible stream. Audio only.
    2.92 -# mpjpeg     : Multipart JPEG (works with Netscape without any plugin)
    2.93 -# jpeg       : Generate a single JPEG image.
    2.94 -# asf        : ASF compatible streaming (Windows Media Player format).
    2.95 -# swf        : Macromedia Flash compatible stream
    2.96 -# avi        : AVI format (MPEG-4 video, MPEG audio sound)
    2.97 -Format mpeg
    2.98 -
    2.99 -# Bitrate for the audio stream. Codecs usually support only a few
   2.100 -# different bitrates.
   2.101 -AudioBitRate 32
   2.102 -
   2.103 -# Number of audio channels: 1 = mono, 2 = stereo
   2.104 -AudioChannels 1
   2.105 -
   2.106 -# Sampling frequency for audio. When using low bitrates, you should
   2.107 -# lower this frequency to 22050 or 11025. The supported frequencies
   2.108 -# depend on the selected audio codec.
   2.109 -AudioSampleRate 44100
   2.110 -
   2.111 -# Bitrate for the video stream
   2.112 -VideoBitRate 64
   2.113 -
   2.114 -# Ratecontrol buffer size
   2.115 -VideoBufferSize 40
   2.116 -
   2.117 -# Number of frames per second
   2.118 -VideoFrameRate 3
   2.119 -
   2.120 -# Size of the video frame: WxH (default: 160x128)
   2.121 -# The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga,
   2.122 -# qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga,
   2.123 -# wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720,
   2.124 -# hd1080
   2.125 -VideoSize 160x128
   2.126 -
   2.127 -# Transmit only intra frames (useful for low bitrates, but kills frame rate).
   2.128 -#VideoIntraOnly
   2.129 -
   2.130 -# If non-intra only, an intra frame is transmitted every VideoGopSize
   2.131 -# frames. Video synchronization can only begin at an intra frame.
   2.132 -VideoGopSize 12
   2.133 -
   2.134 -# More MPEG-4 parameters
   2.135 -# VideoHighQuality
   2.136 -# Video4MotionVector
   2.137 -
   2.138 -# Choose your codecs:
   2.139 -#AudioCodec mp2
   2.140 -#VideoCodec mpeg1video
   2.141 -
   2.142 -# Suppress audio
   2.143 -#NoAudio
   2.144 -
   2.145 -# Suppress video
   2.146 -#NoVideo
   2.147 -
   2.148 -#VideoQMin 3
   2.149 -#VideoQMax 31
   2.150 -
   2.151 -# Set this to the number of seconds backwards in time to start. Note that
   2.152 -# most players will buffer 5-10 seconds of video, and also you need to allow
   2.153 -# for a keyframe to appear in the data stream.
   2.154 -#Preroll 15
   2.155 -
   2.156 -# ACL:
   2.157 -
   2.158 -# You can allow ranges of addresses (or single addresses)
   2.159 -#ACL ALLOW <first address> 
   2.160 -
   2.161 -# You can deny ranges of addresses (or single addresses)
   2.162 -#ACL DENY <first address> 
   2.163 -
   2.164 -# You can repeat the ACL allow/deny as often as you like. It is on a per
   2.165 -# stream basis. The first match defines the action. If there are no matches,
   2.166 -# then the default is the inverse of the last ACL statement.
   2.167 -#
   2.168 -# Thus 'ACL allow localhost' only allows access from localhost.
   2.169 -# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and
   2.170 -# allow everybody else.
   2.171 -
   2.172 -</Stream>
   2.173 -
   2.174 -
   2.175 -##################################################################
   2.176 -# Example streams
   2.177 -
   2.178 -
   2.179 -# Multipart JPEG
   2.180 -
   2.181 -#<Stream test.mjpg>
   2.182 -#Feed feed1.ffm
   2.183 -#Format mpjpeg
   2.184 -#VideoFrameRate 2
   2.185 -#VideoIntraOnly
   2.186 -#NoAudio
   2.187 -#Strict -1
   2.188 -#</Stream>
   2.189 -
   2.190 -
   2.191 -# Single JPEG
   2.192 -
   2.193 -#<Stream test.jpg>
   2.194 -#Feed feed1.ffm
   2.195 -#Format jpeg
   2.196 -#VideoFrameRate 2
   2.197 -#VideoIntraOnly
   2.198 -##VideoSize 352x240
   2.199 -#NoAudio
   2.200 -#Strict -1
   2.201 -#</Stream>
   2.202 -
   2.203 -
   2.204 -# Flash
   2.205 -
   2.206 -#<Stream test.swf>
   2.207 -#Feed feed1.ffm
   2.208 -#Format swf
   2.209 -#VideoFrameRate 2
   2.210 -#VideoIntraOnly
   2.211 -#NoAudio
   2.212 -#</Stream>
   2.213 -
   2.214 -
   2.215 -# ASF compatible
   2.216 -
   2.217 -<Stream test.asf>
   2.218 -Feed feed1.ffm
   2.219 -Format asf
   2.220 -VideoFrameRate 15
   2.221 -VideoSize 352x240
   2.222 -VideoBitRate 256
   2.223 -VideoBufferSize 40
   2.224 -VideoGopSize 30
   2.225 -AudioBitRate 64
   2.226 -StartSendOnKey
   2.227 -</Stream>
   2.228 -
   2.229 -
   2.230 -# MP3 audio
   2.231 -
   2.232 -#<Stream test.mp3>
   2.233 -#Feed feed1.ffm
   2.234 -#Format mp2
   2.235 -#AudioCodec mp3
   2.236 -#AudioBitRate 64
   2.237 -#AudioChannels 1
   2.238 -#AudioSampleRate 44100
   2.239 -#NoVideo
   2.240 -#</Stream>
   2.241 -
   2.242 -
   2.243 -# Ogg Vorbis audio
   2.244 -
   2.245 -#<Stream test.ogg>
   2.246 -#Feed feed1.ffm
   2.247 -#Title "Stream title"
   2.248 -#AudioBitRate 64
   2.249 -#AudioChannels 2
   2.250 -#AudioSampleRate 44100
   2.251 -#NoVideo
   2.252 -#</Stream>
   2.253 -
   2.254 -
   2.255 -# Real with audio only at 32 kbits
   2.256 -
   2.257 -#<Stream test.ra>
   2.258 -#Feed feed1.ffm
   2.259 -#Format rm
   2.260 -#AudioBitRate 32
   2.261 -#NoVideo
   2.262 -#NoAudio
   2.263 -#</Stream>
   2.264 -
   2.265 -
   2.266 -# Real with audio and video at 64 kbits
   2.267 -
   2.268 -#<Stream test.rm>
   2.269 -#Feed feed1.ffm
   2.270 -#Format rm
   2.271 -#AudioBitRate 32
   2.272 -#VideoBitRate 128
   2.273 -#VideoFrameRate 25
   2.274 -#VideoGopSize 25
   2.275 -#NoAudio
   2.276 -#</Stream>
   2.277 -
   2.278 -
   2.279 -##################################################################
   2.280 -# A stream coming from a file: you only need to set the input
   2.281 -# filename and optionally a new format. Supported conversions:
   2.282 -#    AVI -> ASF
   2.283 -
   2.284 -#<Stream file.rm>
   2.285 -#File "/usr/local/httpd/htdocs/tlive.rm"
   2.286 -#NoAudio
   2.287 -#</Stream>
   2.288 -
   2.289 -#<Stream file.asf>
   2.290 -#File "/usr/local/httpd/htdocs/test.asf"
   2.291 -#NoAudio
   2.292 -#Author "Me"
   2.293 -#Copyright "Super MegaCorp"
   2.294 -#Title "Test stream from disk"
   2.295 -#Comment "Test comment"
   2.296 -#</Stream>
   2.297 -
   2.298 -
   2.299 -##################################################################
   2.300 -# RTSP examples
   2.301 -#
   2.302 -# You can access this stream with the RTSP URL:
   2.303 -#   rtsp://localhost:5454/test1-rtsp.mpg
   2.304 -#
   2.305 -# A non-standard RTSP redirector is also created. Its URL is:
   2.306 -#   http://localhost:8090/test1-rtsp.rtsp
   2.307 -
   2.308 -#<Stream test1-rtsp.mpg>
   2.309 -#Format rtp
   2.310 -#File "/usr/local/httpd/htdocs/test1.mpg"
   2.311 -#</Stream>
   2.312 -
   2.313 -
   2.314 -# Transcode an incoming live feed to another live feed,
   2.315 -# using libx264 and video presets
   2.316 -
   2.317 -#<Stream live.h264>
   2.318 -#Format rtp
   2.319 -#Feed feed1.ffm
   2.320 -#VideoCodec libx264
   2.321 -#VideoFrameRate 24
   2.322 -#VideoBitRate 100
   2.323 -#VideoSize 480x272
   2.324 -#AVPresetVideo default
   2.325 -#AVPresetVideo baseline
   2.326 -#AVOptionVideo flags +global_header
   2.327 -#
   2.328 -#AudioCodec libfaac
   2.329 -#AudioBitRate 32
   2.330 -#AudioChannels 2
   2.331 -#AudioSampleRate 22050
   2.332 -#AVOptionAudio flags +global_header
   2.333 -#</Stream>
   2.334 -
   2.335 -##################################################################
   2.336 -# SDP/multicast examples
   2.337 -#
   2.338 -# If you want to send your stream in multicast, you must set the
   2.339 -# multicast address with MulticastAddress. The port and the TTL can
   2.340 -# also be set.
   2.341 -#
   2.342 -# An SDP file is automatically generated by ffserver by adding the
   2.343 -# 'sdp' extension to the stream name (here
   2.344 -# http://localhost:8090/test1-sdp.sdp). You should usually give this
   2.345 -# file to your player to play the stream.
   2.346 -#
   2.347 -# The 'NoLoop' option can be used to avoid looping when the stream is
   2.348 -# terminated.
   2.349 -
   2.350 -#<Stream test1-sdp.mpg>
   2.351 -#Format rtp
   2.352 -#File "/usr/local/httpd/htdocs/test1.mpg"
   2.353 -#MulticastAddress 224.124.0.1
   2.354 -#MulticastPort 5000
   2.355 -#MulticastTTL 16
   2.356 -#NoLoop
   2.357 -#</Stream>
   2.358 -
   2.359 -
   2.360 -##################################################################
   2.361 -# Special streams
   2.362 -
   2.363 -# Server status
   2.364 -
   2.365 -<Stream stat.html>
   2.366 -Format status
   2.367 -
   2.368 -# Only allow local people to get the status
   2.369 -ACL allow localhost
   2.370 -ACL allow 192.168.0.0 192.168.255.255
   2.371 -
   2.372 -#FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico
   2.373 -</Stream>
   2.374 -
   2.375 -
   2.376 -# Redirect index.html to the appropriate site
   2.377 -
   2.378 -<Redirect index.html>
   2.379 -URL http://www.ffmpeg.org/
   2.380 -</Redirect>
     3.1 --- a/musl-libc-dev/receipt	Fri Nov 29 13:06:35 2019 +0100
     3.2 +++ b/musl-libc-dev/receipt	Sun Dec 01 11:07:17 2019 +0100
     3.3 @@ -1,7 +1,7 @@
     3.4  # SliTaz package receipt.
     3.5  
     3.6  PACKAGE="musl-libc-dev"
     3.7 -VERSION="1.1.22"
     3.8 +VERSION="1.1.24"
     3.9  CATEGORY="development"
    3.10  SHORT_DESC="A lightweight, fast, simple, free libc - development files."
    3.11  MAINTAINER="pascal.bellard@slitaz.org"
     4.1 --- a/musl-libc/receipt	Fri Nov 29 13:06:35 2019 +0100
     4.2 +++ b/musl-libc/receipt	Sun Dec 01 11:07:17 2019 +0100
     4.3 @@ -2,7 +2,7 @@
     4.4  
     4.5  PACKAGE="musl-libc"
     4.6  SOURCE="musl"
     4.7 -VERSION="1.1.22"
     4.8 +VERSION="1.1.24"
     4.9  CATEGORY="development"
    4.10  SHORT_DESC="A lightweight, fast, simple, free libc."
    4.11  MAINTAINER="pascal.bellard@slitaz.org"