SliTaz Repositories

     1.1 --- a/busybox/stuff/udhcpd.conf	Tue Apr 08 11:23:56 2008 +0000
     1.2 +++ b/busybox/stuff/udhcpd.conf	Sun Aug 16 10:22:39 2020 +0000
     1.3 @@ -2,67 +2,114 @@
     1.4  #
     1.5  
     1.6  # The start and end of the IP lease block
     1.7 -start           192.168.0.20    #default: 192.168.0.20
     1.8 -end             192.168.0.254   #default: 192.168.0.254
     1.9 +start		192.168.0.20	#default: 192.168.0.20
    1.10 +end		192.168.0.254	#default: 192.168.0.254
    1.11  
    1.12  # The interface that udhcpd will use
    1.13 -interface       eth0            #default: eth0
    1.14 +interface	eth0		#default: eth0
    1.15  
    1.16 -# The maximum number of leases (includes addressesd reserved
    1.17 -# by OFFER's, DECLINE's, and ARP conficts
    1.18 -#max_leases     254             #default: 254
    1.19 +# The maximum number of leases (includes addresses reserved
    1.20 +# by OFFER's, DECLINE's, and ARP conflicts). Will be corrected
    1.21 +# if it's bigger than IP lease block, but it ok to make it
    1.22 +# smaller than lease block.
    1.23 +#max_leases	254		#default: 254
    1.24  
    1.25 -# The amount of time that an IP will be reserved (leased) for if a
    1.26 -# DHCP decline message is received (seconds).
    1.27 -#decline_time   3600            #default: 3600 (1 hour)
    1.28 +# The amount of time that an IP will be reserved (leased to nobody)
    1.29 +# if a DHCP decline message is received (seconds)
    1.30 +#decline_time	3600		#default: 3600 (1 hour)
    1.31  
    1.32 -# The amount of time that an IP will be reserved (leased) for if an
    1.33 -# ARP conflct occurs. (seconds
    1.34 -#conflict_time  3600            #default: 3600 (1 hour)
    1.35 +# The amount of time that an IP will be reserved
    1.36 +# if an ARP conflict occurs (seconds)
    1.37 +#conflict_time	3600		#default: 3600 (1 hour)
    1.38  
    1.39 -# How long an offered address is reserved (leased) in seconds
    1.40 -#offer_time     60              #default: 60 (1 minute)
    1.41 +# How long an offered address is reserved (seconds)
    1.42 +#offer_time	60		#default: 60 (1 minute)
    1.43  
    1.44 -# If a lease to be given is below this value, the full lease time is
    1.45 -# instead used (seconds).
    1.46 -#min_lease      60              #defult: 60
    1.47 +# If client asks for lease below this value, it will be rounded up
    1.48 +# to this value (seconds)
    1.49 +#min_lease	60		#default: 60 (1 minute)
    1.50  
    1.51  # The location of the leases file
    1.52 -lease_file     /var/lib/udhcpd.leases     #default: /var/lib/misc/udhcpd.leases
    1.53 +lease_file	/var/lib/udhcpd.leases	#default: /var/lib/misc/udhcpd.leases
    1.54  
    1.55  # The location of the pid file
    1.56 -pidfile        /var/run/udhcpd.pid     #default: /var/run/udhcpd.pid
    1.57 +pidfile	/var/run/udhcpd.pid	#default: /var/run/udhcpd.pid
    1.58  
    1.59 -# The remainer of options are DHCP options and can be specifed with the
    1.60 +# The time period at which udhcpd will write out leases file.
    1.61 +# If this is 0, udhcpd will never automatically write leases file.
    1.62 +# Specified in seconds.
    1.63 +#auto_time	7200
    1.64 +
    1.65 +# Every time udhcpd writes a leases file, the below script will be called
    1.66 +#notify_file			# default: no script
    1.67 +#notify_file	dumpleases	# useful for debugging
    1.68 +
    1.69 +# The following are bootp specific options
    1.70 +# next server to use in bootstrap
    1.71 +#siaddr		192.168.0.22	# default: 0.0.0.0 (none)
    1.72 +# tftp server name
    1.73 +#sname		zorak		# default: none
    1.74 +# tftp file to download (e.g. kernel image)
    1.75 +#boot_file	/var/nfs_root	# default: none
    1.76 +
    1.77 +# Static leases map
    1.78 +#static_lease 00:60:08:11:CE:4E 192.168.0.54
    1.79 +#static_lease 00:60:08:11:CE:3E 192.168.0.44
    1.80 +
    1.81 +# The remainder of options are DHCP options and can be specified with the
    1.82  # keyword 'opt' or 'option'. If an option can take multiple items, such
    1.83  # as the dns option, they can be listed on the same line, or multiple
    1.84 -# lines. The only option with a default is 'lease'.
    1.85 +# lines.
    1.86 +# Examples:
    1.87 +#opt	dns	192.168.10.2 192.168.10.10
    1.88 +option	subnet	255.255.255.0
    1.89 +#opt	router	192.168.10.2
    1.90 +#opt	wins	192.168.10.10
    1.91 +#option	dns	129.219.13.81	# appended to above DNS servers for a total of 3
    1.92 +#option	domain	local
    1.93 +option	lease	864000		# default: 10 days
    1.94 +#option	msstaticroutes	10.0.0.0/8 10.127.0.1		# single static route
    1.95 +#option	staticroutes	10.0.0.0/8 10.127.0.1, 10.11.12.0/24 10.11.12.1
    1.96 +# Arbitrary option in hex form:
    1.97 +#option	0x08	01020304	# option 8: "cookie server IP addr: 1.2.3.4"
    1.98  
    1.99 -#Examples
   1.100 -#opt     dns     192.168.10.2 192.168.10.10
   1.101 -option  subnet  255.255.255.0
   1.102 -#option  dns     129.219.13.81   # appened to above DNS servers for a total of 3
   1.103 -option  lease   864000          # 10 days of seconds
   1.104 -
   1.105 -# Currently supported options
   1.106 -#opt subnet
   1.107 -#opt timezone
   1.108 -#opt router
   1.109 -#opt timesrv
   1.110 -#opt namesrv
   1.111 -#opt dns
   1.112 -#opt logsrv
   1.113 -#opt cookiesrv
   1.114 -#opt lprsrv
   1.115 -#opt bootsize
   1.116 -#opt domain
   1.117 -#opt swapsrv
   1.118 -#opt rootpath
   1.119 -#opt ipttl
   1.120 -#opt mtu
   1.121 -#opt broadcast
   1.122 -#opt wins
   1.123 -#opt lease
   1.124 -#opt ntpsrv
   1.125 -#opt tftp
   1.126 -#opt bootfile
   1.127 +# Currently supported options (for more info, see options.c):
   1.128 +#opt lease      NUM
   1.129 +#opt subnet     IP
   1.130 +#opt broadcast  IP
   1.131 +#opt router     IP_LIST
   1.132 +#opt ipttl      NUM
   1.133 +#opt mtu        NUM
   1.134 +#opt hostname   STRING		# client's hostname
   1.135 +#opt domain     STRING		# client's domain suffix
   1.136 +#opt search     STRING_LIST	# search domains
   1.137 +#opt nisdomain  STRING
   1.138 +#opt timezone   NUM		# (localtime - UTC_time) in seconds. signed
   1.139 +#opt tftp       STRING		# tftp server name
   1.140 +#opt bootfile   STRING		# tftp file to download (e.g. kernel image)
   1.141 +#opt bootsize   NUM		# size of that file
   1.142 +#opt rootpath   STRING		# (NFS) path to mount as root fs
   1.143 +#opt wpad       STRING
   1.144 +#opt serverid   IP		# default: server's IP
   1.145 +#opt message    STRING		# error message (udhcpd sends it on success too)
   1.146 +#opt vlanid     NUM		# 802.1P VLAN ID
   1.147 +#opt vlanpriority NUM		# 802.1Q VLAN priority
   1.148 +# Options specifying server(s)
   1.149 +#opt dns        IP_LIST
   1.150 +#opt wins       IP_LIST
   1.151 +#opt nissrv     IP_LIST
   1.152 +#opt ntpsrv     IP_LIST
   1.153 +#opt lprsrv     IP_LIST
   1.154 +#opt swapsrv    IP
   1.155 +# Options specifying routes
   1.156 +#opt routes     IP_PAIR_LIST
   1.157 +#opt staticroutes   STATIC_ROUTES # RFC 3442 classless static route option
   1.158 +#opt msstaticroutes STATIC_ROUTES # same, using MS option number
   1.159 +# Obsolete options, no longer supported
   1.160 +#opt logsrv     IP_LIST	# 704/UDP log server (not syslog!)
   1.161 +#opt namesrv    IP_LIST	# IEN 116 name server, obsolete (August 1979!!!)
   1.162 +#opt cookiesrv  IP_LIST	# RFC 865 "quote of the day" server, rarely (never?) used
   1.163 +#opt timesrv    IP_LIST	# RFC 868 time server, rarely (never?) used
   1.164 +# TODO: in development
   1.165 +#opt userclass  STRING		# RFC 3004. set of LASCII strings. "I am a printer" etc
   1.166 +#opt sipserv    STRING LIST	# RFC 3361. flag byte, then: 0: domain names, 1: IP addrs