# HG changeset patch # User Antoine Bodin # Date 1298503405 -3600 # Node ID f2661bf09753aebd472fb04a8f0e54b69624032b # Parent b5613798e5a3fb929bc599add64fe1921e8dd5c2 Put libtaz stuff into wok diff -r b5613798e5a3 -r f2661bf09753 libtaz/receipt --- a/libtaz/receipt Wed Feb 23 17:38:24 2011 +0000 +++ b/libtaz/receipt Thu Feb 24 00:23:25 2011 +0100 @@ -1,15 +1,11 @@ # SliTaz package receipt. PACKAGE="libtaz" -VERSION="0.0.7.1" +VERSION="1.0" CATEGORY="base-system" SHORT_DESC="Slitaz generic library." MAINTAINER="gokhlayeh@slitaz.org" -TARBALL="$VERSION.tar.bz2" WEB_SITE="http://www.slitaz.org/" -# Use mercurial until tarball is mirrored. -#WGET_URL="http://mirror.slitaz.org/sources/$PACKAGE/$TARBALL" -WGET_URL="http://hg.slitaz.org/$PACKAGE/archive/$VERSION.tar.bz2" TAGS="slitaz" CONFIG_FILES="/etc/slitaz/slitaz.conf" @@ -18,8 +14,8 @@ { mkdir -p $fs/usr/share/slitaz/web \ $fs/usr/lib/slitaz $fs/etc/slitaz - cp -a $src/libtaz $fs/usr/lib/slitaz - cp -a $src/libtaz-modules $fs/usr/lib/slitaz - cp -a $src/slitaz.conf $fs/etc/slitaz - cp -a $src/web $fs/usr/share/slitaz + cp -a $stuff/libtaz $fs/usr/lib/slitaz + cp -a $stuff/libtaz-modules $fs/usr/lib/slitaz + cp -a $stuff/slitaz.conf $fs/etc/slitaz + cp -a $stuff/web $fs/usr/share/slitaz } diff -r b5613798e5a3 -r f2661bf09753 libtaz/stuff/AUTHORS --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libtaz/stuff/AUTHORS Thu Feb 24 00:23:25 2011 +0100 @@ -0,0 +1,6 @@ +Christophe Lincoln +Pascal Bellard +Eric Joseph-Alexandre +Paul Issott +Rohit Joshi +Antoine Bodin \ No newline at end of file diff -r b5613798e5a3 -r f2661bf09753 libtaz/stuff/COPYING --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libtaz/stuff/COPYING Thu Feb 24 00:23:25 2011 +0100 @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + Copyright (C) + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff -r b5613798e5a3 -r f2661bf09753 libtaz/stuff/libtaz --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libtaz/stuff/libtaz Thu Feb 24 00:23:25 2011 +0100 @@ -0,0 +1,97 @@ +######################################################################## +# This is the SliTaz main library (/usr/lib/slitaz/libtaz). +# libtaz is modular : see explanation of the function source_lib bellow. +# +# Author : Antoine Bodin +# +# Version : 0.0.1 (alpha1) +# +# Documentation : none (will be avaible with beta version) +# The documentation will include an explanation of all fonction, how to +# use them and how to improve this library. +# +# Devnotes (suppress while beta is released) : +# Add a generic download script ? -> download from tazlito & tazwok +# Add a generic create/cleanup script for tmp files ? +# check_for (pkg on cmd line, pkg, receipt, etc.) -> tazwok,tazpkg,list +# +# Note : as the work is progress some part are dirty code or some other +# are note finish. I update this because we need the libdep +# +######################################################################## +# INITIALIZATION +######################## +# Load the Slitaz main configuration file : /etc/slitaz/slitaz.conf. +# Don't load it if application is called by one having already loaded it, +# to avoid options overwrite. + +. /etc/slitaz/slitaz.conf + +# Load the command as some module use it. +log_command="$0 $@" + +# Define & create temporary directory as it's used by report. +tmp=/tmp/$(basename $0)-$$ +mkdir -p $tmp + +######################################################################## +# EXIT FUNCTIONS +######################## +# run_on_exit commands are executed when apps exit (whatever the reason) +# run_on_kill commands are executed only when apps is killed (or Ctrl+C) +# Note : one command per line in the variable. +run_on_exit="rm -rf $tmp" +run_on_kill="" +trap run_on_exit EXIT +trap run_on_kill INT KILL + +run_on_exit() +{ + echo "$run_on_exit" | while read c; do + run_on_exit=$(echo "$run_on_exit" | sed 1d) + $c + done + trap - EXIT +} + +run_on_kill() +{ + echo "$run_on_kill" | while read c; do + run_on_kill=$(echo "$run_on_kill" | sed 1d) + $c + done + trap - INT KILL + run_on_exit +} + +######################################################################## +# This function should be used after sourcing libtaz to source modular +# libraries. Libtaz only source main configuration file and contain only +# this function. The modular libraries should be put in slitaz lib +# directory (/usr/lib/slitaz/libtaz-modules). +# +# Usage : source_lib lib [lib2] [lib3] ... +# +# Description of libraries including with libtaz : +# commons : functions used by most SliTaz scripts +# get_option* : function to check & parse arguments of a command line +# report : display and log script in a configurable way +# +# * need a code rewiew, please don't use them for production : code can +# be hardly modified. +# +# All theses libraries contains additionnal functions. Check them to +# if you want to know wich ones and how to use them. +# More information will be avaible at beta release. + +sourced_lib="" +source_lib() +{ + for i in $@; do + [ "$(echo $sourced_lib | grep $i)" ] && continue + [ ! -f "/usr/lib/slitaz/libtaz-modules/$i" ] && \ + echo "WARNING: libtaz source_lib: can't find /usr/lib/slitaz/libtaz-modules/$i" >&2 && \ + continue + . /usr/lib/slitaz/libtaz-modules/$i && sourced_lib="$sourced_lib $i" + done +} diff -r b5613798e5a3 -r f2661bf09753 libtaz/stuff/libtaz-modules/commons --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libtaz/stuff/libtaz-modules/commons Thu Feb 24 00:23:25 2011 +0100 @@ -0,0 +1,85 @@ +status() +{ + local CHECK=$? + echo -en "\\033[70G[ " + if [ $CHECK = 0 ]; then + echo -en "\\033[1;32mOK" + else + echo -en "\\033[1;31mFailed" + fi + echo -e "\\033[0;39m ]" +} + +get_config() +{ + if [ -f "./`basename $0`.conf" ]; then + . ./`basename $0`.conf + elif [ -f "/etc/slitaz/`basename $0`.conf" ]; then + . /etc/slitaz/`basename $0`.conf + else + echo -e "\nUnable to find the configuration file : /etc/slitaz/`basename $0`.conf" >&2 + echo -e "Please read the `basename $0` documentation.\n" >&2 + exit 1 + fi +} + +# The classic SliTaz check_root function used in near all SliTaz tools. +check_root() +{ + [ $(id -u) = 0 ] && return + echo -e "\nYou must be root to run `basename $0` with this option." >&2 + echo -e "Please type 'su' and root password to become super-user.\n" >&2 + exit 1 +} + +# A classic check_dir function : +# - create directory if needed and echo about it. +# Return error if directory is created (to chain other commands with ||) +check_dir() +{ + if ! [ -d "$1" ]; then + echo -n "Creating $1..." + mkdir -p "$1" + status + return 1 + fi +} + +# Install package if missing. +check_pkg() +{ + if ! [ -d $INSTALLED/$1 ]; then +# report step "Installing package : $1" + tazpkg get-install $1 +# report end-step + fi +} + +# Display an horizontal line, can be used to have clearest script. +horizontal_line() +{ + echo "================================================================================" +} + +# Store -- options in a variable. +# Test phase. +# Need to add something to filter options and report error in case option is not +# listed a used by the command. +get_options() +{ + if echo "$log_command" | fgrep -q ' '--help; then + echo "Avaible options for $(echo `basename "$log_command"` | cut -d ' ' -f 1,2) : $get_options_list" + exit 0 + fi + for get_option in $(echo "$log_command" | tr ' ' '\n' | grep ^-- | sed 's/^--//'); do + if [ "${get_options_list/${get_option%%=*}}" = "$get_options_list" ]; then + echo "Option ${get_option%%=*} is incorrect, valid options are : $get_options_list". >&2 + exit 1 + fi + if [ "$get_option" = "${get_option/=}" ]; then + export $get_option=yes + else + export $get_option + fi + done +} diff -r b5613798e5a3 -r f2661bf09753 libtaz/stuff/libtaz-modules/report --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libtaz/stuff/libtaz-modules/report Thu Feb 24 00:23:25 2011 +0100 @@ -0,0 +1,431 @@ + +# Usage : use_report functions/commands +# 'use_report' execute functions/commands and redirect the output. +# You can use 'report' function to display message, steps, blocs and +# status in the terminal and organize the display of the log. + +report_verbosity_opt=all + +report_display() +{ + while read out; do + [ "$out" = €øß ] && report_stop_display && return + echo -e " ...\n ~~~~~~~~~~~~~~~~~~~~ Messages ~~~~~~~~~~~~~~~~~~~~ " + echo "$out" + break + done + while read out; do + [ "$out" = €øß ] && report_stop_display && return + echo "$out" + done +} + +report_create_html() +{ + if ! [ -f "$log_opt" ]; then + mkdir -p "${log_opt%/*}" + cp /usr/share/slitaz/web/template.html "$log_opt" + sed -e "s/xml:lang=\"us\" lang=\"us\"/xml:lang=\"${LANG%%_*}\" lang=\"${LANG%%_*}\"/" \ + -e "s~Title of the page~SliTaz GNU/Linux - Log: $0~" \ + -e "s~Second Title~Log: $0~" -i "$log_opt" + echo '
' >> "$log_opt" + else + sed 's~
~~' -i "$log_opt" + fi + + echo -e "

$(basename "$log_command")

\n$(date)" >> "$log_opt" + [ -L "${log_opt%/*}/web" ] || ln -s /usr/share/slitaz/web "${log_opt%/*}/web" +} + +report_start() +{ + # Create the temporary directory if needed. + ! [ -d /tmp/libtaz/ ] && mkdir -p /tmp/libtaz + ! [ -d $SLITAZ_LOG ] && mkdir -p $SLITAZ_LOG + + # Give permissions to all users if user is root. + if test $(id -u) = 0 ; then + chmod 777 /tmp/libtaz + chmod -R 777 $SLITAZ_LOG + fi + + # Get a random logfile name. + if [ "$report_pid" ]; then + log_tmp=/tmp/libtaz/$report_pid + embeded_mode=enabled + initial_bloc_level=$bloc_level + if [ "$open_bloc" ]; then + initial_bloc_level=$(($bloc_level+1)) + embeded_open_bloc=yes + fi + if [ -p $log_tmp.stdout ] && ! [ "$open_bloc" = yes ]; then + report_step_status + fi + else + log_tmp=/tmp/libtaz/$$ + report_pid=$$ + fi + + # Use the default logfile if there's no logfile was specified by the main script. + [ ! "$log_opt" ] && [ "$report_log_all" = yes ] && \ + log_opt="$SLITAZ_LOG/`basename $0`/$(date -Iseconds).html" + export report_pid log_opt + + #if [ "$embeded_mode" != enabled ]; then + + # Initialize html logfile if needed, or prepare it to be edited. + [ "$log_opt" ] && { [ ! "$embeded_mode" ] || [ ! -f "$log_opt" ]; } && report_create_html + + echo -n "" > $log_tmp + + # Initialize named pipes & set I/O redirections. + [ "$embeded_mode" ] || exec 3>&1 4>&2 + + # Start debugging if the option is enabled. + if [ "$debug_opt" ]; then + exec 2>$log_tmp.stdout + set -vx + echo "[--------------------------/!\ DEBUG MODE ENABLED /!\--------------------------]" + fi + + # Theses variable are used to configure the display of steps in terminal. + bloc1_delimiter="================================================================================" + bloc1_display=" " + bloc2_delimiter="----------------------------------------------------------------------------" + bloc2_display=" > " + bloc3_delimiter="* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *" + bloc3_display=" * " + + # Use a trap to exit cleanly if app is killed. + trap "report_exit $(basename $0) killed by user" SIGINT SIGTERM + + # Use another display function if quiet is enable. + [ "$report_verbosity_opt" = "none" ] && report_display() +{ + while read out; do + [ "$out" = €øß ] && report_stop_display && return + done +} +} + +report_stop_display() +{ + rm $log_tmp.stderr $log_tmp.stdout + sed '/^€øß$/d' -i $log_tmp + touch $log_tmp.end +} + +report_listen() +{ + mkfifo $log_tmp.stderr $log_tmp.stdout + { + { tee -a $log_tmp $log_tmp.error <$log_tmp.stderr | while read line; do echo -e "\\033[1;31m${line}\\033[0m"; done; }& + { tee -a $log_tmp <$log_tmp.stdout; }& + } | report_display& + usleep 10000 + exec 1>>$log_tmp.stdout 2>>$log_tmp.stderr +} + +report_stop_listen() +{ + if [ -p $log_tmp.stdout ]; then + [ -f $log_tmp.end ] && rm $log_tmp.end + usleep 10000 && echo €øß + while ! [ -f $log_tmp.end ]; do + usleep 10000 + done + exec 1>&3 2>&4 + rm $log_tmp.end + fi +} + +report_stop() +{ + ! [ "$report_pid" ] && exit + # End step and close blocs. + [ "$step_running" ] && report end-step + while [ $(($bloc_level)) -gt $(($initial_bloc_level)) ]; do + report close-bloc + done + + if [ "$embeded_mode" = enabled ]; then + [ "$bloc_level" ] && echo $(eval echo \$bloc${bloc_level}_status) > $log_tmp.status + if [ "$embeded_open_bloc" = opened ]; then + touch $log_tmp.eob + fi + else + [ "$log_opt" ] && echo '' >> "$log_opt" + exec 3>&- 4>&- + rm -f $log_tmp* + unset report_pid log_opt + + # Stop debugging + [ "$debug_opt" ] && set +vx + [ "$report_log_all" ] && create_log_index + fi +} + +# Use this to stop a program with error. +report_exit() +{ + # Log&display error message. + echo -e "$@" >&2 + + # Close step as failed. + if [ "$step_running" ]; then + (exit 1) + report end-step + fi + + # Set blocs as failed, report and exit. + bloc1_status="failed" + bloc2_status="failed" + bloc3_status="failed" + report_stop + exit 1 +} + +# Usage : report [command] [message] +# +# type :message - simply display the message. +# step - name the step and display status when ended. +# end-step - display status of the step, it's done automaticaly when +# starting a new step, closing a bloc or stop report. +# open-bloc - open the list of steps in the operation; +# close-bloc- close the current bloc. +report() +{ + # First : get status before it is changed by other commands. + check_status=$? + case "$1" in + start) + report_start + ;; + stop) + report_stop + ;; + exit) + shift && report_exit "$@" + ;; + # TODO : Code displaying a message during a step run. + message) + shift + echo -e "${current_bloc_display}$@" + report_message=$(echo "$@" | sed "s~$~
~g") + [ "$log_opt" ] && echo -e "
$report_message
" >> "$log_opt" + ;; + step) + [ "$log_step" ] && echo "$2" > $log_step + [ "$open_bloc" ] && report_open_bloc + [ "$step_running" ] && report_step_status + echo -ne "$current_bloc_display$2\\033[70G[ \\033[1;32mR\\033[33mU\\033[31mN\\033[0;39m ]" >&3 + [ "$log_opt" ] && echo -e "
\n$2" >> "$log_opt" + export step_running="$2" + report_listen + ;; + end-step) + [ -s $(dirname $log_opt)/step ] && rm -f $(dirname $log_opt)/step + if ! [ "$step_running" ]; then + report_return_code=$check_status + else + report_step_status + fi + ;; + open-bloc) + export open_bloc=yes + ;; + close-bloc) + if [ -f "$log_tmp.eob" ]; then + report_open_bloc + check_status=$(cat $log_tmp.status) + rm $log_tmp.status + report_set_bloc_status + elif [ "$step_running" ]; then + report_step_status + fi + + # Then close the bloc and report status if it was open. + if ! [ "$open_bloc" ]; then + export current_bloc_display="$(eval echo \"\$bloc$((${bloc_level}-1))_display\")" + [ "$(eval echo \"\$bloc${bloc_level}_delimiter\")" ] && \ + echo -e "$current_bloc_display$(eval echo \"\$bloc${bloc_level}_delimiter\")" >&3 + echo -en "$current_bloc_display... $(eval echo \"\$bloc${bloc_level}_running\")" >&3 + check_status=$(eval echo \$bloc${bloc_level}_status) + report_display_status + + # Set the bloc status in the log file. + if [ "$log_opt" ]; then + sed "s~
~
~" -i "$log_opt" + echo "
" >> "$log_opt" + fi + echo "" >&3 + export bloc_level=$(($bloc_level-1)) + [ "$bloc_level" = 0 ] && unset bloc_level + else + unset open_bloc + fi + ;; + sublog) + shift + ! [ "$log_list" ] && log_list="$log_opt" + export log_list="$1 $log_list" + export log_opt="$1" + report_create_html + ;; + end-sublog) + [ "$log_opt" ] || continue + export log_list="${log_list#* }" + echo '
' >> "$log_opt" + # Grep the summary of sublog (main action + status) and put + # it in the main log, plus a link. + [ "$log_list" ] && { sed -n '/
/,$p' $log_opt | \ + grep -A1 -F '
SubLog' && \ + echo "
" + } >> ${log_list%% *} + export log_opt="${log_list%% *}" + report_step_status + ;; + esac + return $report_return_code +} + +# Open a bloc of substeps in terminal and log. +report_open_bloc() +{ + unset open_bloc + [ "$embeded_open_bloc" = "yes" ] && embeded_open_bloc=opened + [ -f "$log_tmp.eob" ] && rm $log_tmp.eob + export bloc_level=$(($bloc_level+1)) + export bloc${bloc_level}_running="$step_running" + if [ -p $log_tmp.stdout ]; then + if [ -s $log_tmp ]; then + prebloc=yes + report_step_status + prebloc= + else + report_stop_listen + echo ' ...' >&3 + fi + [ "$(eval echo \$bloc${bloc_level}_delimiter)" ] && \ + echo "$current_bloc_display$(eval echo \"\$bloc${bloc_level}_delimiter\")" >&3 + [ "$log_opt" ] && sed "s~
~
~" -i "$log_opt" + else + exec 1>&3 2>&4 + fi + export current_bloc_display="$(eval echo \"\$bloc${bloc_level}_display\")" + unset bloc${bloc_level}_status + unset step_running +} + +# This is the two new status function used by the report tool. +# States are : ok - no error since the start of the step +# warning - there was error(s) since the start of the step +# failed - the last executed command has exiting anormally +report_step_status() +{ + unset report_return_code + if [ -p $log_tmp.stdout ]; then + report_stop_listen + + #Close message bloc if opened. + if [ -s $log_tmp -a "$report_verbosity_opt" = all ] || \ + [ -s $log_tmp.error -a "$report_verbosity_opt" != none ]; then + echo " ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ " >&3 + ! [ "$prebloc" ] && echo -en "$current_bloc_display... $step_running" >&3 && report_addemptyline="yes" + fi + + # Check, display and log the status of the step. + if ! [ "$check_status" = "0" ]; then + check_status=failed + else + [ -s "$log_tmp.error" ] && check_status=warning || check_status=ok + fi + ! [ "$prebloc" ] && report_display_status + [ "$report_addemptyline" ] && echo "" >&3 && unset report_addemptyline + [ "$log_opt" ] && report_rec_log + fi + + [ -f "$log_tmp.eob" ] && rm $log_tmp.eob + + # Set blocs status if needed. + [ -f $log_tmp.status ] && check_status=$(cat $log_tmp.status) && rm $log_tmp.status + [ "$bloc_level" ] && report_set_bloc_status + + # Clear variables / temporary logs. + ! [ "$prebloc" ] && export step_running="" + check_status="" + echo -n "" > $log_tmp.error + echo -n "" > $log_tmp +} + +report_display_status() +{ + [ "$report_return_code" = 1 ] && check_status=failed + echo -en "\\033[70G " >&3 + echo -en "\\033[70G[ " >&3 + [ "$check_status" = ok ] && report_return_code=0 && echo -en "\\033[1;32mOK" >&3 + [ "$check_status" = warning ] && report_return_code=0 && echo -en "\\033[1;33mWarning" >&3 + [ "$check_status" = failed ] && report_return_code=1 && echo -en "\\033[1;31mFailed" >&3 + echo -e "\\033[0;39m ]" >&3 +} + +report_term_to_html() +{ + report_decolorize | sed -e 's~<~\<~' -e 's~>~\>~' -e 's/$/
/' -e 's~STDERR: \(.*\)~\1<\/span>~' -e 's~ ~\ \ \ \ ~' +} + +report_decolorize() +{ + tr -d '\e' | sed -r "s/\[([0-9]{1,3}(;[0-9]{1,3})*)[m|G]//g" +} + +report_rec_log() +{ + ! [ "$prebloc" ] && sed "s~
~
~" -i "$log_opt" + if [ -s "$log_tmp" ]; then + if [ -s "$log_tmp.error" ]; then + cat $log_tmp.error | sort -u | while read line; do + # Format line to avoid sed errors : + line=$(echo "$line" | sed -e 's~\*~\\\*~g' -e 's~\[~\\\[~g' -e 's~\]~\\\]~g') + sed "s~^$line$~STDERR: $line~" -i $log_tmp + done + fi + echo -n "
" >> "$log_opt"
+		cat $log_tmp | report_term_to_html >> "$log_opt"
+		echo "
" >> "$log_opt" + fi + ! [ "$prebloc" ] && echo "
" >> "$log_opt" +} + +# Theses variables keep the status of the blocs. +# A bloc is reported as ok if all child steps are ok and as failed +# if all child steps are failed (or if a fatal error occurs). +# In other cases the bloc is reported as warning. +report_set_bloc_status() +{ + bloc_status=$(eval echo \$bloc${bloc_level}_status) + for n in $(seq $bloc_level -1 1); do + ! [ "$(eval echo \$bloc${n}_status)" ] && eval bloc${n}_status=$check_status + ! [ "$(eval echo \$bloc${n}_status)" = "$check_status" ] && \ + eval bloc${n}_status=warning + done +} + +create_log_index() +{ + cd $SLITAZ_LOG + cp -f /usr/share/slitaz/web/template.html index.html + sed -e "s/xml:lang=\"us\" lang=\"us\"/xml:lang=\"${LANG%%_*}\" lang=\"${LANG%%_*}\"/" \ + -e "s~Title of the page~SliTaz GNU/Linux - Logs Index~" \ + -e "s~Second Title~Logs Index~" -i index.html + echo '
' >> index.html + for log in $(ls -t */*); do + log_title=$(grep '

.*

' $log | sed 's~

\(.*\)

~\1~') + log_date=$(date -r $log) + log_status=$(grep '
' $log | sed -e 1!d -e 's~<.*"\(.*\)">~\1~') + echo -e "
$log_date: $log_title
" >> index.html + done + echo -e '
' >> index.html + chmod 666 index.html +} diff -r b5613798e5a3 -r f2661bf09753 libtaz/stuff/slitaz.conf --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libtaz/stuff/slitaz.conf Thu Feb 24 00:23:25 2011 +0100 @@ -0,0 +1,91 @@ +######################################################################## +# This is the generic SliTaz configuration file used by libtaz to get +# the defaults options and directories. +# +# Theses variables can be overwritted by a lower level of configuration. +# Order for loading variables (the latest definition is keeped) : +# slitaz.conf (then) main app.conf (or) local app.conf +# (or) *.conf of the command line (then) arguments of the command line +# +# ** Alpha Comment by GoKhlaYeh: ** +# With libtaz, I plan to change the default location of some important +# directories to fit the server hierarchy. In a general view I want +# to make the organisation on server and on released system similar. +# The goal is having tools working out-of-the-box in both cases to make +# the contributor work more easy and efficient. +# Theses changes will takes place with Release Candidate, when libtaz +# implementation in all SliTaz tools will be finish, and all code fully +# reviewed. Hope everybody agree with that ;). +# + +######################################################################## +# COMMON DIRECTORIES +######################## + +# Slitaz logs directory. +SLITAZ_LOG="/var/log/slitaz" + +# Slitaz version. +SLITAZ_VERSION="$(cat /etc/slitaz-release)" + +# Slitaz directory. +SLITAZ_DIR="/home/slitaz" + +# Local repository for current version (can contains local packages +# repository, wok, sources, ...). +LOCAL_REPOSITORY="$SLITAZ_DIR/$SLITAZ_VERSION" + +# Online packages repository. +ONLINE_REPOSITORY="http://mirror.slitaz.org/packages/$SLITAZ_VERSION/" + +# Packages cache directory. +CACHE_DIR="/var/cache/tazpkg" + +# Path to repository datas. +LOCALSTATE="/var/lib/tazpkg" + +# Path to installations datas. +INSTALLED="$LOCALSTATE/installed" + +######################################################################## +# COMMON VARIABLES +######################## + +# Packages categories. +CATEGORIES=" +base-system +x-window +utilities +network +graphics +multimedia +office +development +system-tools +security +games +misc +meta +non-free" + + +######################################################################## +# LIBTAZ OPTIONS +######################## +# Theses options are the default setting for all SliTaz tools which use +# libtaz. They are : +# * tazwok +# * tazpkg + +# If this option is enabled, automaticaly install needed packages. It +# can be depends, build_depends, or package needed to perform a specific +# task. +# Value can be : +# * yes = enabled +# * anything else = disabled +auto_install=yes + +# If you want to log all operations (into /var/log/slitaz), +# uncomment the following line +# Note: important operations are logged by default. +#report_log_all=yes \ No newline at end of file diff -r b5613798e5a3 -r f2661bf09753 libtaz/stuff/web/favicon.ico Binary file libtaz/stuff/web/favicon.ico has changed diff -r b5613798e5a3 -r f2661bf09753 libtaz/stuff/web/header-img.png Binary file libtaz/stuff/web/header-img.png has changed diff -r b5613798e5a3 -r f2661bf09753 libtaz/stuff/web/logo.png Binary file libtaz/stuff/web/logo.png has changed diff -r b5613798e5a3 -r f2661bf09753 libtaz/stuff/web/slitaz.css --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libtaz/stuff/web/slitaz.css Thu Feb 24 00:23:25 2011 +0100 @@ -0,0 +1,545 @@ +/* + CSS style for SliTaz Network - (c) 2011 SliTaz GNU/Linux +*/ + +html { + min-height: 102%; +} + +body { + background: #ffffff; + color: black; + font: 13px sans-serif, vernada, arial; + margin: 0; + border-top: 34px solid #f1f1f1; +} +a { text-decoration: underline; color: #103a5e; } +a:hover { text-decoration: none; color: blue; } +img { border: 0pt none; } + +/* Accessibility */ + +#access { + position: absolute; + top: 4px; + right: 0px; + text-align: right; + width: auto; + margin: 0; + padding: 4px 4px 4px 20px; + font-size: 11px; + font-weight: bold; +} + +#access a { + background: transparent; + color: #0F314E; + text-decoration: none; +} +#access a:hover { color: #b64b22; } +#access img { vertical-align: middle; } + +/* Header */ + +#header { + background: #351a0a url(header-img.png) no-repeat top right; + color: black; + width: 100%; + height: 42px; + border-top: 1px solid black; + border-bottom: 1px solid #999; + margin-bottom: 33px; +} + +#titre { + position: absolute; + font-size: 14px; + font-weight: bolder ; + left: 180px; + top: 4px; +} + +#logo { + position: absolute; + float: left; + left: 16px; + top: -10px; + width: 200px; + height: 74px; +} + +/* Side bar */ + +#nav { + position: absolute; + top: 102px; + right: 80px; + color: #555555; + float: right; + width: 250px; + line-height: 1.5em; + text-align: left; + font-size: 12px; +} + +#nav h4 { + font-size: 120%; + color: #666666; + font-weight: bold; + margin: 0; + padding: 0 0 1px 0; + border-bottom: 1px solid #cecece; +} + +#nav a { + color: #0F314E; + background: inherit; + display: block; + text-decoration: none; + font-weight: bold; +} + +#nav a:hover { + color: #b64b22; + text-decoration: none; + display: block; +} + +#nav .nav_box ul { + list-style-type: none; + margin: 0; + padding: 10px 24px 10px 0px; + background-color: inherit; +} + +#nav li { display: inline; } + +#nav ul { + -moz-border-radius: 8px; + -webkit-border-radius: 8px; + border-radius: 8px; + list-style-type: none; + margin: 10px 0; + padding: 10px 24px 10px 24px; + background-color: #eaeaea; +} + +.nav_box { + margin: 10px 0; + padding: 10px 24px 10px 24px; + background-color: #eaeaea; + text-align: justify; +} + +#nav .nav_box p { line-height: 1.3em; } + +#nav .nav_box p a { + display: inline; + font-weight: normal; + text-decoration: underline; +} + +#nav .nav_box p a:hover { + text-decoration: none; + color: blue; + background: inherit; +} + +/* Page content */ + +#content, #content-full { + background: white; + color: black; + text-align: justify; + height: auto; + margin: 6px 320px 0px 0px; + padding: 0px 40px 60px 80px; +} +#content-full { + margin: 0; + padding: 0px 80px 40px 80px; +} +#content li, #content-full li { + line-height: 1.5em; + text-align: left; +} +#news li { + list-style-type: square; + border-bottom: 1px dotted #BEBEBE; + margin-left: -25px; + padding: 4px 0px 4px 0px; +} +#news a { text-decoration: none; } + +/* Box and block. */ + +.infobox { + margin: 20px 60px; + padding: 12px; + background: #f8f8f8; +} +.infobox img { vertical-align: middle; } +.infobox:hover { background-color: #FBFBFB; } +.block { + /*padding-bottom: 35%;*/ + color: black; + min-height: 200px; + margin-bottom: 40px; +} +.block ul { + list-style-type: none; + margin: 0; + padding: 0 20px; +} +.block_left { + width: 46%; + float: left; + background-color: #eaeaea; + margin: 4px 2px; + padding: 0 10px 10px 10px; +} +.block_right { + width: 46%; + float: right; + background-color: #eaeaea; + margin: 4px 2px; + padding: 0 10px 10px 10px; +} +#block_top { + color: black; + background-color: #eaeaea; + min-height: 180px; + margin-bottom: 40px; + margin-right: 340px; + padding: 0 10px; +} +#block_nav { + width: 300px; + min-height: 180px; + float: right; + background-color: #eaeaea; + margin: 0; + padding: 0 10px; +} +.nav_box, .infobox, .block_left, .block_right, #block_top, +#block_nav, #footer { + -moz-border-radius: 8px; + -webkit-border-radius: 8px; + border-radius: 8px; + -moz-box-shadow: 0 1px 3px #666; + -webkit-box-shadow: 0 1px 3px #666; + box-shadow: 0 1px 3px #666; + /* CSS3 transition */ + -webkit-transition-property: background-color; + -webkit-transition-duration: 2s; + -moz-transition-property: background-color; + -moz-transition-duration: 2s; + transition-property: background-color; + transition-duration: 2s; +} +#block_nav { font-weight: bold; } +#block_nav a { text-decoration: none; } +#block_nav li a:hover { color: #b64b22; } +#block_nav ul { margin: 0; list-style-type: none; } +#block_nav h3 { font-size: 110%; } +.nav_box:hover, .block_left:hover, .block_right:hover, +#block_top:hover, #block_nav:hover, #footer:hover { + background-color: #f8f8f8; +} +.right_box { + width: 50%; + float: right; +} +/* Text transform at 45deg */ +.floor { + color: #999999; + font-size: 20px; + -webkit-transform: rotate(-45deg) skew(15deg, 15deg); + -moz-transform: rotate(-45deg) skew(15deg, 15deg); + -o-transform: rotate(-45deg) skew(15deg, 15deg); + -ms-transform: rotate(-45deg) skew(15deg, 15deg); + transform: rotate(-45deg) skew(15deg, 15deg); +} +#twitter, .feedbox { + margin-top: 20px; + -moz-border-radius: 8px; + -webkit-border-radius: 8px; + border-radius: 8px; + -moz-box-shadow: 0 1px 3px #666; + -webkit-box-shadow: 0 1px 3px #666; + box-shadow: 0 1px 3px #666; +} +.feedbox { + background-color: #f9f9f9; + padding: 10px 20px; + margin: 20px 100px; +} +.feedbox div { + height: 320px; + overflow: auto; +} +.feedbox ul { list-style-type: none; margin: 0; } + +/* Button */ + +.button { margin-left: 20px; } +.button a { + background-color: #b64b22; + color: #ffffff; + margin-right: 6px; + padding: 6px 10px; + font-size: 14px; + -moz-border-radius: 4px; + -webkit-border-radius: 4px; + border-radius: 4px; + -moz-box-shadow: 0 1px 3px #666; + -webkit-box-shadow: 0 1px 3px #666; + box-shadow: 0 1px 3px #666; +} +.button a:hover, input[type=submit]:hover { + background-color: #a3431f; + color: #ffffff; +} +input[type=submit] { + border: 1px solid #b64b22; + background-color: #b64b22; + color: white; + font-weight: bold; + cursor: pointer; + padding: 3px 10px; + font-size: 14px; + -moz-border-radius: 2px; + -webkit-border-radius: 2px; + border-radius: 2px; + -moz-box-shadow: 0 0 5px #666; + -webkit-box-shadow: 0 0 5px#666; + box-shadow: 0 0 5px #666; + margin-left: -5px; +} +input[type=text] { + border: 1px solid #333333; + padding: 3px; + width: 100%; +} + +/* Clouds */ + +#cloud { + padding: 10px 0px; + line-height: 3em; + text-align: center; +} +#cloud a { padding: 0 2px; color: #444444; } +#cloud a.tag1 { font-size: 0.7em; font-weight: 100; } +#cloud a.tag2 { font-size: 0.8em; font-weight: 200; } +#cloud a.tag3 { font-size: 0.9em; font-weight: 300; } +#cloud a.tag4 { font-size: 1.0em; font-weight: 400; } +#cloud a.tag5 { font-size: 1.2em; font-weight: 500; } +#cloud a.tag6 { font-size: 1.4em; font-weight: 600; } +#cloud a.tag7 { font-size: 1.6em; font-weight: 700; } +#cloud a.tag8 { font-size: 1.8em; font-weight: 800; } +#cloud a.tag9 { font-size: 2.2em; font-weight: 900; } +#cloud a.tag10 { font-size: 2.5em; font-weight: 900; } + +/* Slideshow and gallery */ + +#slideshow +{ + overflow: hidden; + margin: 10px auto 10px; + position: relative; + width: 260px; + height: 163px; +} + +#slideshow img +{ + border: 0; + width: 260px; + height: 163px; +} + +#gallery { text-align: center; } + +/* HTML styles */ + +h1 { + color: #444444; + background: transparent; + text-align: left; + margin: 0px 0px 4px 0px; + font-size: 150%; + font-weight: bold; + padding: 5px 0 0 10px; +} + +h2 { + color: #b64b22; + padding: 0; + margin: 20px 0 0 0; + font-size: 130%; + font-weight: bold; +} + +h3 { + font-weight: bold; + color: #666666; + background: transparent; +} + +h3 img, h2 img { + vertical-align: middle; + width: 20px; + height: 20px; + padding-right: 4px; +} +code, tt { + font-size: 12px; + color: #669900; +} + +pre, pre.script { + padding: 10px; + color: black; + background: #E8E8E8; + border: 1px inset #606060; +} + +/* Packages pages */ + +.pkg_nav { + border-top: 1px solid black; + margin-top: 10px; + padding-top: 10px; +} + +pre.package { + padding: 0px; + color: black; + background: white; + border: 0px solid #fff; +} + +p.get { + text-align: center; + padding: 10px; + color: black; + background: #F3F3F3; + border: 1px solid #DEDEDE; + border-radius: 4px; + -moz-border-radius: 4px; + -webkit-border-radius: 4px; +} +p.get a { + font-weight: bold; + text-decoration: none; +} +.pkgs-search { + text-align: center; + padding: 40px 20px 80px 20px; +} + +#footer { + margin: 0px 80px 80px 80px; + padding: 10px; + background: #eaeaea; + color: #666666; + height: 180px; + clear: both; + border-radius: 8px; + -moz-border-radius: 8px; + -webkit-border-radius: 8px; + -moz-box-shadow: 0 1px 3px #666; + -webkit-box-shadow: 0 1px 3px #666; + box-shadow: 0 1px 3px #666; +} + +#footer a { color: #666666; } +#footer a:hover { color: #333333; } +#footer ul { list-style-type: none; } +#footer li { padding: 2px; } +#footer h4 { margin: 0 20px; font-size: 125%; } + +.year:after { + /* content: "2007-2011"; */ + content: "2011"; +} + +/* Report style */ + +#report { + margin: 5px; +} + +#report div { + padding: 3px; + margin: 0px; + outline: 1px solid white +} + +#report div.message { + background: transparent; + border: black 1px solid; + border-left: black 3px solid; +} + +#report div.ok { + background: #d2ffd2; + border: green 1px solid; + border-left: green 3px solid; +} + +#report div.warning { + background: #ffffd2; + border: yellow 1px solid; + border-left: yellow 3px solid; +} + +#report div.failed { + background: #ffd2d2; + border: red 1px solid; + border-left: red 3px solid; +} + +#report span.error { + background: red; + padding: 0px; + margin: 0px; + border: 0px; + width: 100%; + display: inline-block; +} + +#report pre { + background: black; + color: white; + padding: 3px; + margin: 0px; + border: 0px; + word-wrap: break-word; + white-space: normal; +} + +#report h1 { + display: inline; +} + +#report h2 { + display: inline; +} + +#report h3 { + display: inline; +} + +#report h4 { + display: inline; +} + +#report h5 { + display: inline; +} + +#report h6 { + display: inline; +} diff -r b5613798e5a3 -r f2661bf09753 libtaz/stuff/web/template.html --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libtaz/stuff/web/template.html Thu Feb 24 00:23:25 2011 +0100 @@ -0,0 +1,18 @@ + + + + Title of the page + + + + + + + +